Redox potentials of dopamine and its supramolecular complex with aspartic acid

Dopamine (DA) can be oxidized to dopamine quinone (DAquinone) through a one-step, two-electron redox reaction. The electron transfer property of DA and its supramolecular complex with aspartic acid (Asp) has been investigated by the theoretical calculations. We calculated the standard redox potentials (E ^o) of DA/DAquinone at the MP2/6-31G(d,p)//B3LYP/6-31G(d,p), MP2/6-31+G(d,p)//B3LYP/6-31+G(d,p), MP2/6-31G(d,p)//B3LYP/6-311G(d,p), and MP2/6-311+G(d,p)//B3LYP/6-311+G(d,p) levels. Comparing the experimental value, the redox potentials of DA/DAquinone obtained at MP2//B3LYP/6-311G(d,p) and MP2//B3LYP/6-311+G(d,p) levels can be considered as the upper and lower estimates. DA can form supramolecular complex (DA-Asp) with Asp through hydrogen bond (H-bond). Therefore, the values of 0.631 and 0.628 V obtained at MP2//B3LYP/6-311G(d,p) and MP2//B3LYP/6-311+G(d,p) levels for DA-Asp/DAquinone-Asp can be proposed as the upper and lower estimates of a probable (about 0.630 V) value of the corresponding redox potential. The calculated E ^o values of DA-Asp/DAquinone-Asp at the four theoretical levels are upper than those of DA/DAquinone, which indicates that the formation of H-bonds weaken the electron-donating ability of DA.     

Determination of nicotine and its metabolite cotinine in urine and cigarette samples by capillary electrophoresis coupled with electrochemiluminescence

In this paper, CE coupled with electrochemiluminesence (ECL) detection using a 76‐μm Pt disk as working electrode was developed for nicotine (NIC) determination. The major metabolite of NIC is cotinine (COT), which has a similar tertiary amine structure to NIC. However, there is a carbonyl group attached in the structure of COT, which leads to the great decrease in ECL response. In order to improve the ECL response of COT, NaBH₄ was used for carbonyl reduction. After reduction, NIC and COT were separated and detected by CE‐ECL. ECL response plotted with NIC concentration was linear between 5.0×10^?7 and 5.0×10^?5 mol/L (81–8100 μg/L), with LOD of 5.0×10^?8 mol/L (8.1 μg/L). The developed CE‐ECL method was applied for NIC determination in urine and cigarette samples.     

Molecular modeling study of checkpoint kinase 1 inhibitors by multiple docking strategies and prime/MM-GBSA calculation

Developing chemicals that inhibit checkpoint kinase 1 (Chk1) is a promising adjuvant therapeutic to improve the efficacy and selectivity of DNA-targeting agents. Reliable prediction of binding-free energy and binding affinity of Chk1 inhibitors can provide a guide for rational drug design. In this study, multiple docking strategies and Prime/Molecular Mechanics Generalized Born Surface Area (Prime/MM-GBSA) calculation were applied to predict the binding mode and free energy for a series of benzoisoquinolinones as Chk1 inhibitors. Reliable docking results were obtained using induced-fit docking and quantum mechanics/molecular mechanics (QM/MM) docking, which showed superior performance on both ligand binding pose and docking score accuracy to the rigid-receptor docking. Then, the Prime/MM-GBSA method based on the docking complex was used to predict the binding-free energy. The combined use of QM/MM docking and Prime/MM-GBSA method could give a high correlation between the predicted binding-free energy and experimentally determined pIC(50) . The molecular docking combined with Prime/MM-GBSA simulation can not only be used to rapidly and accurately predict the binding-free energy of novel Chk1 inhibitors but also provide a novel strategy for lead discovery and optimization targeting Chk1.     

2-羟基-1-萘醛缩氨基脲的抗菌活性及其与牛血清白蛋白的结合作用研究

采用滤纸片法和打孔法2种抗菌试验方法,考察2-羟基-1-萘醛缩氨基脲（NAHSEM）对金黄色葡萄球菌、大肠杆菌、枯草杆菌的抗菌活性的结果表明,NAHSEM对3种细菌具有较强的抗菌活性。荧光光谱法研究了NAHSEM与牛血清白蛋白（BSA）的结合作用表明,这种结合行为使BSA的内源荧光猝灭。通过猝灭常数、结合常数和结合位点...     

碳纳米管在样品前处理中的应用

碳纳米管是一维碳基纳米材料,具有独特的管状结构、良好的化学稳定性、热稳定性和高比表面积.近年来,碳纳米管在有机小分子、金属离子和生物大分子分离富集方面得到了广泛的应用.本文综述了碳纳米管及功能化碳纳米管在固相萃取、固相微萃取、中空纤维膜保护固相微萃取和液膜萃取等样品前处理技术中的应用.     

Tetra-β-(2-(diethylamino)ethoxy) nickel phthalocyanine: synthesis and inclusion in MCM-41

In order to include phthalocyanine macromolecule in MCM-41 molecular sieve, a inclusion-suitable phthalocyanine derivative tetra-β-(2-(diethylamino)ethoxy) nickel phthalocyanine was synthesized, in two steps, from 4-nitrophthalonitrile and 2-(diethylamino)ethanol, and characterized by mass spectra, ¹H nuclear magnetic resonance spectroscopy, ultraviolet visible spectroscopy, infrared spectroscopy and elemental analysis, which confirmed the proposed molecular structure. The inclusion of synthesized phthalocyanine compound in MCM-41 was carried out by the in situ synthesis method using cetyltrimethyl ammonium bromide as structure template and tetraethyl orthosilicate as silica source in presence of this phthalocyanine compound. The inclusion material was studied by means of X-ray diffraction, field emission scanning electron microscopy, high-resolution transmission electron microscopy, nitrogen adsorption isotherm measurements, etc. Results showed that the macromolecular compound was successfully included into MCM-41, the obtained inclusion material displayed mainly prisms and globes, and the material was a kind of mesoporous materials with regularly hexagonal honeycomb array of uniform cylindrical pores and high surface area.     

Surface characterization of 7S and 11S globulin powders from soy protein examined by X-ray photoelectron spectroscopy and scanning electron microscopy

In this study the surface composition of 7S and 11S globulin powders from soybean proteins by aqueous buffer and reverse micelle extractions had been examined using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Analysis by XPS revealed that the O and N atomic percentage of 7S and 11S globulin surfaces from bis(2-ethylhexyl) sodium sulfosuccinate (AOT) reverse micelle was higher than from aqueous buffer, but the C atomic percentage was lower. The O/C ratio of the 7S globulin powder from aqueous buffer and reverse micelle was similar while significant differences were obtained in the O/C ratio of the 11S globulin powder, N/C atom ratios of the 7S and 11S globulin powders and high-resolution XPS C 1s, N 1s, O 1s spectra. Powder microstructure after reverse micelle treatment showed the presence of small pores, indicating the effect of reverse micelle on the 7S and 11S globulin structure. The obtained results indicated that the reverse micelle could affect the C, O and N components on the surface of soybean proteins.     

Hydrogen‐Bond‐Based Magnetic Exchange Between μ‐Diethylnicotinamide(aqua)bis(X‐salicylato)copper(II) Polymeric Chains

Polymeric salicylatocopper(II) complexes of unusual composition [C u(X‐ sal)₂( μ‐denia)(H₂O)]_n [denia = diethylnicotinamide, and X‐sal = 5‐methylsalicylate ( 1 ), 3‐methylsalicylate ( 2 ), 4‐methoxysalicylate ( 3 ), 3,5‐dichlorosalicylate ( 4 ) and 3,5‐dibromosalicylate ( 5 )] were synthesized and characterized. Magnetic measurements were performed in the temperature range 1.8–300 K. The structural unit of all complexes consists of a Cu^II atom, which is monodentately coordinated by the pair of X‐salicylate anions in trans positions. Water and the diethylnicotinamide ligand occupy the other two basal plane positions of the tetragonal pyramid. The axial positions are occupied by a diethylnicotinamide oxygen atom of neighboring structural units, thus forming a spiral polymeric structure parallel to b axis. Magnetic measurements showed that all complexes 1 – 5 exhibit a susceptibility maximum at about 6–8 K. The obtained data fit to Bleaney–Bowers equation gave singlet‐triplet energy gaps 2J = –8.60 cm^–1 for 1 , 2J = –6.57 cm^–1 for 2 , 2J = –8.57 cm^–1 for 3 , 2J = –6.82 cm^–1 for 4 , and 2J = –6.45 cm^–1 for 5 . The supramolecular structure based on hydrogen bonds [described by supramolecular synthons R₂²(10) and R₂²(12)] is the pathway for antiferromagnetic interactions of the magnetically coupled pairs of copper atoms of neighboring chains within the 2D supramolecular layers. The results of the magnetic measurements suggest involvement of the COO groups in the magnetic interaction pathway for all five complexes.     

Syntheses, structures and luminescent properties of a series of 3D lanthanide coordination polymers with tripodal semirigid ligand

Reactions of the tripodal bridging ligand 5-(4-carboxy-phenoxy)-isophthalic acid (abbreviated as H₃cpia) with lanthanide salts lead to the formation of a family of different coordination polymers, that is, [Ln(cpia)(H₂O)₂]_n·nH₂O (Ln=Ce (1), Pr (2), Nd (3), Sm (4), Eu (5), Gd (6), Dy (7), Er (8), Tm (9) and Y (10)) in the presence of formic acid or diethylamine, which are characterized by elemental analysis, IR spectrum, thermogravimetric analysis (TGA), XRPD spectrum and single-crystal X-ray diffraction. Compounds 1-10 are isostructural and exhibit three-dimensional microporous frameworks. Furthermore, the photoluminescent properties of 4, 5 and 7 have been studied in detail.